aluminum foil strip

Specification

6061 T6 polished aluminum plate

Source:Original Time:2021-05-28 17:18
Inquiry:
The main alloying elements of 6061 T6 polished aluminum plate are magnesium and silicon, and form Mg2Si. It has medium strength, good corrosion resistance, weldability and good oxidation effect. It can be used to manufacture trucks, build-up buildings, ships, trams, furniture, precision processing, etc.
6061 T6 polished aluminum plate
6061 T6 polished aluminum plate
6061 T6 polished aluminum plate  notes
 
1. We need to pay attention to the problem of chemical agents, and we need to plan 70% phosphoric acid, and add 3% nitric acid and sulfuric acid inside. After the proportion is finished, we need to constantly stir, and then we can handle it after the complete blending.
 
2. The need to pay attention to polishing environment should be carried out in a clean environment, otherwise, rust is easily caused after chemical spraying. Only in a clean environment can it be prevented.
 
3. Pay attention to the operation process, and must follow the requirements for treatment. More and more staff, they need to wear protective equipment to avoid the impact of their own safety.
 
4. After operation, the 6061 aluminum plate needs to be inspected after polishing to prevent any missing parts, so as to ensure that each place can be placed after being processed.
 
6061 T6 polished aluminum plate manufacturer
 
Thickness of supply aluminum plate: 0.3-200 mm,
 
Supply aluminum plate width 1000 / 1250 / 1500 / 1800 / 2000 / 2200 / 2500 mm,
 
Supply aluminum plate length 2000 / 2500 / 3000 mm or other length
 
The Executive Standards of aluminum plate: gb/t3880, gb/t6891, gb/t3618, gb/t29503, ys/t490, ys/t431,
 
Production process: casting / hot rolling
 
Surface: Aluminum native / drawing / mirror / oxidation / color spraying
 
The surface defect depth of the plate and strip shall not exceed the allowable negative deviation value of the thickness of the plate and strip, and ensure the thickness of the plate and strip.