2014 Aluminum Plate Sheet
2014 Aluminum Plate
Sheet
Alloy 2014
aluminum plate sheet is an aluminium-based alloy often used in the aerospace
industry.
It is easily machined in
certain tempers, and among the strongest available aluminium alloys, as well as
having high hardness. However, it is difficult to weld, as it is subject to
cracking.
Alloy 2014 aluminum plate
sheet is the second most popular of the 2000-series aluminum alloys, after 2024
aluminum alloy. It is commonly extruded and forged. The corrosion resistance of
this alloy is particularly poor. To combat this, it is often clad with pure
aluminum. If unclad 2014 aluminum is to be exposed to the elements, it should be
painted as a corrosion protection measure.
.jpg)
Alloy:
2014
Temper:
O,T3,T4,T451,T42,T6,T651,T62
Stretching capacity:
300000m2, supposed width is 2000mm, then the maximum thickness is
150mm.
Thickness:
1.0mm--300mm
With:
500mm--3000mm
Length:
1000mm--12000mm
Surface: Mill finish, Bright
finish, paper interleaved, one side film, both sides film.
Chemical Properties
Chemical Properties
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Ga | V | Others |
Aluminium min. |
|
| Each | Total | |||||||||||||
| 2014 | 0.5-1.2 | 0.7 | 3.9-5.0 | 0.4-1.2 | 0.2-0.8 | 0.1 | - | 0.25 | 0.15 | - | - | 0.05 | 0.15 | Remainder |
