Aluminum Plate
Automative aluminum plate
Source：Original
Time：2021-05-22 14:04
Automative aluminum plate
Back to the time in 1910, aluminum plate has already been used in public transportations. After decades’ development, nowadays, most of the bodies of fuel-tank trucks, semi-trailers and trailers are made of aluminum plate products. In the meantime, there is an increment in the use of aluminum plate products in passenger cars, so, in the near future aluminum car bodies must occupy the advantage in the market.
There are serious advantages for the application of aluminum in autos, such as higher strength-to-weight ratio, higher fuel efficiency, and better formability. As a result, in such a tough period regarding to energy and environmental issues, aluminum plays an essential role in weight lightening, and fuel efficiency increment to ease the energy and environmental problems.
HWALU aluminum is capable of providing various aluminum plate and profiles for automotive industries, which can be used in truck chassis, oil tank, passenger car body panel, body structure and heat exchange system etc.
Classic alloy: 5182, 5083, 6016, 6011, 6N12, 6014, 6181A, 6009, 6005A, 6061, 6082
Product character: good weldability, good formability, superb bake hardening ability.
| Specifications | ||||
| Alloys (AA) | Temper | Thickness range (mm) | Length range (mm) | Width range (mm) |
|
5182, 5083, 6016, 6011, 6N12, 6014, 6181A, 6009, 6005A, 6061, 6082 |
F and O H111, H112, T4, T6 (For 6061, 6063), T651(Stretched plate) |
6 — 300 | 1000 — 10000 | 500 — 2700 |
| Stretched aluminum plate | |
| Thickness limit | 6 — 70 mm |
| Length limit | 2000 — 10000 mm |
| Chemical composition | ||||||
| Alloy (%) | 5182 | 5083 | 6181A | 6005A | 6061 | 6082 |
| Si | 0.20 | 0.40 | 0.8~1.2 | 0.50~0.9 | 0.40— 0.80 | 0.7~1.3 |
| Fe | 0.35 | 0.40 | 0.45 | 0.35 | 0.70 | 0.50 |
| Cu | 0.15 | 0.10 | 0.10 | 0.30 | 0.15— 0.40 | 0.10 |
| Mn | 0.20~0.50 | 0.40— 1.0 | 0.15 | 0.50 | 0.15 | 0.40~1.0 |
| Mg | 4.0~5.0 | 4.0— 4.9 | 0.6~1.0 | 0.40~0.7 | 0.8— 1.2 | 0.6~1.2 |
| Cr | 0.10 | 0.05— 0.25 | 0.10 | 0.30 | 0.04— 0.35 | 0.25 |
| Ni | — | — | — | — | — | — |
| Zn | 0.25 | 0.25 | 0.20 | 0.20 | 0.25 | 0.20 |
| Ti | 0.10 | 0.15 | 0.10 | 0.10 | 0.15 | 0.10 |
| Each (Others) | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 |
| Total (Others) | 0.15 | 0.10 | 0.10 | 0.15 | 0.15 | 0.15 |
| Al | Remaining | Remaining | Remaining | Remaining | Remaining | Remaining |
| Single number indicates maximum content. | ||||||
| Packing |
| Sheet : Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection.(aluminum plate) |
Previous ：Aerosapce aluminum plate
Next ：Marine aluminum plate
RELATED READ：
- Railway aluminum plate2021.3.19
- Aerosapce aluminum plate2021.3.19
- Automative aluminum plate2021.3.19
- Marine aluminum plate2021.3.19
